EL34 Version: the power tube is EL34, (replace power tube is EL34, 6CA7, KT66, 6L6), using PCB inside design;
KT88 Version: the power tube is PSVANE KT88 , (replace power tube is KT88, 6550, KT90), using PCB inside design;
6550 Version: the power tube is 6550 , (replace power tube is KT100, KT88, KT90), using PCB inside design;
FU50 Version: the power tube is FU50 , (replace power tube is Russian GU-50 or Germany LS-50 ), using PCB inside design; ( this model just have the standard version )
Stand Version Technical parameters:
● Output Power per channel: 20w/EL34, 30w/KT88, 35w/fu50 ( only with triode connection mode)
● Frequency response: 20Hz~30kHz ±1db
● Total harmonic distortion: < 1% (1kHz)
● Input sensitivity: 500mV
● Input impedance: 100KΩ
● Output impedance for speakers: 4Ω - 8Ω
● Signal to noise ratio: 89dB
● Preamp Tube: 12AT7×2(center position for R1 and L1), 12AU7×2(side for R2 and L2), 6N6T×2(longer side for R3 and L3)
● Rectifier: 5Z3P×2
● Power tube: 6550B/KT88/EL34-B/FU-50 (depens options )
● The power supply cattle and output cattle are made of imported high-grade silicon steel sheets and layered inter-stage winding technology. Power burdock steel: 114mm × stack thickness 60mm, output burdock steel: 96mm × stack thickness 40mm. High quality nylon skeleton, high purity oxygen free copper wire.
● Using WIMA red MKP polypropylene capacitive coupling.
● Use carbon film resistors. Although the error and thermal noise of the carbon film resistor are slightly larger than the resistance of the metal film, everyone recognizes that the sound of the carbon film is warmer. The actual thermal noise carbon film is also almost indistinguishable from the gold film. Considering the warm tone, the default printed circuit board model of this machine uses carbon film resistors, and the scaffolding welding machine uses military Dahongpao gold film resistors and carbon film mixed.
● Rectifier part, high voltage adopts secondary rectification technology, 5Z3P×2 bile rectification, 4 high quality large ponds and 2 inductive filters.
●Refer to the classic line improvement, 12AT7×2 voltage amplification, 12AU7×2 inversion, 6N6×2 cathode output push, push-pull AB amplification. The frequency response is wider, the phase shift is smaller, and the fidelity is higher.
● Transformers are processed by potting methods commonly used by most manufacturers to provide insulation, moisture, shock absorption, etc., which can greatly reduce the magnetic coupling through the chassis, reduce resonance and reduce noise.
Luxury Version Option:
EL34 Version: the power tubes are EL34, (replace power tube is EL34, 6CA7, KT66, 6L6), using point to point hand-wiring;
KT88 Version: the power tubs are PSVANE KT88 , (replace power tube is KT88, 6550, KT90), using point to point hand-wiring;
6550 Version: the power tubes are 6550 , (replace power tube is KT100,KT88, KT90), using point to point hand-wiring;
Luxury Version Technical parameters:
● Output Power per channel: 20w/EL34, 30w/KT88,6550 , ( only with triode connection mode)
● Frequency response: 20Hz~30kHz ±1db
● Total harmonic distortion: < 1% (1kHz)
● Input sensitivity: 500mV
● Input impedance: 100KΩ
● Output impedance for speakers: 4Ω - 8Ω
● Signal to noise ratio: 89dB
● Preamp Tube: 12AT7×2(center position for R1 and L1), 12AU7×2(side for R2 and L2), 6N6T×2(longer side for R3 and L3)
● All aluminum chassis; Use ALPS 27 type potentiometer;4 groupes inputs,inputs switchs are with relay.
● The power supply cattle and output cattle are made of imported high-grade silicon steel sheets and layered inter-stage winding technology. Power burdock steel: 114mm × stack thickness 60mm, output burdock steel: 96mm × stack thickness 40mm. High quality nylon skeleton, high purity oxygen free copper wire.
●Using WIMA red MKP polypropylene capacitive coupling.
● Use carbon film resistors. Although the error and thermal noise of the carbon film resistor are slightly larger than the resistance of the metal film, everyone recognizes that the sound of the carbon film is warmer. The actual thermal noise carbon film is also almost indistinguishable from the gold film. Considering the warm tone, the default printed circuit board model of this machine uses carbon film resistors, and the scaffolding welding machine uses military Dahongpao gold film resistors and carbon film mixed.
● Rectifier part, high voltage adopts secondary rectification technology, 5Z3P×2 rectifier tube, 4 high quality large ponds and 2 inductive filters.
●Refer to the classic line improvement, 12AT7×2 voltage amplification, 12AU7×2 inversion, 6N6×2 cathode output push, push-pull AB amplification. The frequency response is wider, the phase shift is smaller, and the fidelity is higher.
● Transformers are processed by potting methods commonly used by most manufacturers to provide insulation, moisture, shock absorption, etc., which can greatly reduce the magnetic coupling through the chassis, reduce resonance and reduce noise.
● Power tube use only triode connection mode to giving a best sound quality by reducing some power
We ship the package within 1-3 days after the payment cleared.*
Shipping via DHL or UPS or FedEx or other express delivery takes 3-7 business days with a tracking number.
Shipping via China Post EMS or HK Post EMS usually takes 7-14 business days with a tracking number.
Shipping via China Post air mail or HK Post air mail usually takes 10-30 business days with a tracking number.
Faster payment, faster delivery.
Buyer pays any import taxes or customs duty.
All items are marked as low value on postal paper for customs to send that our buyers can save some customs fees.
Standard Return Policy:
If the item shows up defective or damaged, please email us immediately.
ONE-YEAR WARRANTY!!!
Brand new replacement with 14 days.
Defective situation must be reported to seller within 14 days upon receipt.
Returned item should be in its original box with all packing materials and shipped to us via a traceable shipping way.
We carefully inspect returned items upon receipt before issuance of refunds or exchanges.
Please allow up to 10 business days for us to process your return.
The customer needs to pay for the shipping costs for returning.
International Shipping:
We ship goods to worldwide. All the packages will come with a tracking number.
Payment Methods
Customers who bought this product also purchased...